It can achieve dimension-driven all entities in part of CAD drawing.

该系统能够在保证局部图形拓扑关系不变的前提下，实现对图形尺寸驱动。

The modules of parameterized drawing were programmed with Visual LISP.

参数化绘图模块用Visual LISP语言编程。

It has multifarious meaning to emphasize Drawing as the basic point of plastic arts.

将素描做为一切造型艺术的基点来强调，其意义是多方面的。

As for drawing process, it is a very important question to confirm limiting drawing ratem.

对于拉深工艺，极限拉深系数m的确定是一个很重要的问题。

Fracture often occurs in process of HSS strand drawing.

在拉拔生产过程中高速钢盘条经常发生拉丝断裂现象。

In addition, another design system of spiral-bevel-gear milling cutter was developed, which can deal with all parameters’ calculating and drawing of milling cutter larger than 3.5 inches.

另外，论文还研究了弧齿锥齿轮铣刀盘设计系统，该系统可完成3.5″以上铣刀盘设计计算和绘图工作。

Fibre material processing is an important branch of materials processing as well as drawing is an important step of fibre material processing.

纤维材料加工是材料加工的重要分支,并条又是纤维材料加工中的一道重要工序。

It was suitable for melt spinning that temperature was 100~150 ℃, revolving speed was 10~15r/min and drawing speed was 2~5m/min.

通过研究发现温度是影响熔融纺丝的关键因素，熔融纺丝较适宜的条件是：温度为100～150℃，挤出机转速为10～15r／min，拉伸速率为2～5m/min。

The Al-l%Si bonding wire produced by the technics of heated mould continuous casting-drawing could satisfy the bonding capability of Thermosonic welding, accroding to GB/T 8646-1998 standard.

热型连铸—拉制工艺制备的Al-1％Si超微细丝的键合性能，可以满足超声波键合的性能要求，符合GB/T 8646-1998标准。

And by annealing, the protofibril may havecomplete lame1lar crystal. Then the pore size may becontrolled by changing the drawing ratio and drawingtemperature.

通过对原纤的热处理可以得到比较完善的片晶结构，而通过改变牵伸倍数与牵伸温度可以控制微孔的大小。